How to perform hardware diagnostics on a dedicated server

Estimated reading time: 1 min

Perform a hardware diagnostics on a dedicated server

In this article, we’re explaining how you can perform your own hardware diagnostics on a dedicated server. 

Prerequisites

Step 1: Log in to your client area

Log in to your client area via https://my.snel.com/clientarea/

Step 2: Starting the diagnostics

When logged in, click on Dashboard and click the server you want to perform a hardware diagnostics on.

Clientarea dashboard

At the left side panel click Server Diagnostics.

Clientarea server diagnostics

Choose for Diagnostic template Diag-x86_64. 

Do not select this checkbox  “All your hard drives will be cleaned up while running diagnostics. Note: diagnostics templates must support this feature”. This will wipe your disks.

Then click Submit.

Clientarea server template

The diagnose will now start.

Clientarea server diagnostics loading

You will see if it’s done when there’s a green bar at the top.

Clientarea server diagnostics done

Step 3: Report back to Snel.com

Please inform our support department once this hardware diagnostic is performed.

Conclusion

Congratulations, you have performed a successful hardware diagnostics on a dedicated server.

Was this article helpful?
Dislike 0
Views: 47

Reader Interactions

Leave a Reply

Your email address will not be published. Required fields are marked *

snel-knowledgebase